SC1000 Display Module, Multi-Parameter Universal Controller

SC1000 Display Module, Multi-Parameter Universal Controller
Product #: LXV402.99.00002
Unit Price Contact Hach
Ships within 1 week

More confidence in your instrument’s performance

Available exclusively on the SC1000 controller, Prognosys predictive diagnostics uses innovative multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

What's included?

Display module with communication (as appropriate), basic user module

Specifications

Alarm: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Analogue Output Functional Mode: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Certifications: North American Certifications: cTUVus to UL 61010A-1 and CSA C22.2 No. 1010.1
FCC ID QIPMC56 / IC ID 267W-MC56
European Certifications: CE per 73/23/EEC and 89/336/EEC TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Communication: Modbus (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
Profibus DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Dimensions (H x W x D): 200 mm x 230 mm x 50 mm
Display: QVGA, 320 x 240 pixels, 256 colours, touch-screen
Display Viewing Area: 111.4 x 83.5 mm
Enclosure rating: IP65
GSM option: Without GSM Module
Inputs: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Material: Enclosure: Polycarbonate
Material Enclosures: Polycarbonate
Mounting: Surface, panel, and pipe (horizontal and vertical) with optional sun shield
Operating temperature range: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Output Opportunities: Up to 12 analogue 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analogue outputs with additional probe modules. Optional digital communcations via Modbus (RS485) and Profibus DP/V1.
Power requirements (Hz): 50/60 Hz
Power requirements (Voltage): 120 - 230 VAC
Relays: Up to four SPDT, user-configurable contacts rated 100 to 230 VAC, 5 Amp resistive maximum per probe module. Additional relays are available with additional probe modules.
Sample Flow Rate: 400 - 600 mL/min
Sample inlet: 1/2" OD Tube Connection
Storage conditions: -20 to 70 °C / 0 to 95% relative humidity, non-condensing
Warranty: 12 months
Weight: approx. 1.2 kg (depending on configuration)
What's included?: Display module with communication (as appropriate), basic user module