9184sc Total Free Chlorine (TFC) Amperometric Sensor

9184sc Total Free Chlorine (TFC) Amperometric Sensor
Product #: LXV432.99.00001
Unit Price Contact Hach
Ships within 1 week

Reagentless analysis of Free Chlorine

Provides a wide continuous Chlorine measurement range: 0 - 20 mg/L

Integral temperature and pH sensors provide more accurate readings

Optional acidification (for cleaning) and intemittent flow accessories link in series so they only take up one sensor port controller

Compatible with multi-sensor, multi-parameter digital controllers

What's included?

9184sc Chlorine Sensor Panel with pH Sensor, Membranes and Electrolyte and Manual.

Specifications

Accuracy: 2% or ±10 ppb TFC, whichever is greater at pH <7.5
Accuracy 2: 2% or ±10 ppb HOCl, whichever is greater at pH <8
Calibration Interval: 2 months
Calibration Method: Zero calibration: electrically (automatic) or with de-chlorinated water
Calibration: comparison of lab method with process sample
pH calibration: single- or two-point using standards or comparison of lab method with process sample
Description: 9184sc Total Free Chlorine Amperometric Sensor
Enclosure rating: IP66 / NEMA 4X
Flow: 14 L/h (200 - 250 mL/min) auto-regulated by flow through cell
Interferences: No interference from chloramines.
Chlorine dioxide and ozone interfere with measurement.
Lower Limit of Detection (LOD): 0.005 mg/L HOCl
Maintenance Interval: Measurement cell: 6 months for membrane and electrolyte for typical application
pH: 1 - 1.5 years for typical application
Measuring Interval: Continuous
Measuring Principle: Amperometric/Membrane (electrode, membrane, electrolyte)
Measuring range: 0 - 20 mg/L HOCl
Mounting: Flat, vertical surface (panel, stand, etc.)
Operating temperature range: 0 - 45 °C
Parameter: Total Free Chlorine: Sum of hypochlorous acid, hypochlorite and free chlorine
pH Range: 4 - 8 pH, acidification unit available for pH >8
Pressure Range: 0.1 - 2 bar in flow cell
Relative Humidity: 0 - 90 % non-condensing
Response time: 90 % in less than 90 seconds
Sample Input: 0.25" outer diameter
Sample Output: 0.5" inner diameter
Sample Temperature: 2 - 45 °C
Standard deviation: 0.7 %
Storage conditions: -20 - 60 °C
Temperature Compensation: Automatic over sample temperature range
  Automatic over sample temperature range
Warranty: 12 months
Weight: 6.5 kg
What's included?: 9184sc Chlorine Sensor Panel with pH Sensor, Membranes and Electrolyte and Manual.